Current Supply

Current Supply (native units)

Definition

The sum of all native units ever created and currently visible on the ledger (i.e., issued) as of that day. For account-based protocols, only accounts with positive balances are counted.

Name

MetricID

Unit

Interval

Current Supply (native units)

SplyCur

Native units

All time

Details

This metric might be also be characterized as “total issued supply” as it captures the sum of all native units visible in the ledger up until the metric calculation point
For UTXO chains, current supply is the sum of all unspent output values.
For account chains, current supply is the sum of all account balances.

Chart

Asset-Specific Details

For ZEC, it includes the shielded pools value
For Ripple, escrows are counted towards total current supply.
For privacy coins like Monero or Grin, total current supply is computed by summing up mining rewards.
For Solana, includes inflation from staking rewards and deflation from burnt coins

Release History

Released in the 1.0 release of NDP

Availability for Assets

Coin Metrics CoverageCoin Metrics Coverage

NDF (Network Distribution Factor)

Definition

The ratio of supply held by addresses with at least one ten-thousandth of the current supply of native units to the current supply.

Name

MetricID

Unit

Interval

NDF (Network Distribution Factor)

NDF

Dimensionless

1 day

Release History

Released in the version 4.9 of Network Data Pro

Interpretation

NDF is one way to assess Supply Dispersion. This ratio encompasses a broader economic group, perhaps equivalent to a combination of the middle and lower classes. It is calculated by assessing the aggregate supply in addresses holding more than 0.01% of a cryptoasset’s supply and dividing that figure by the total supply.

Availability for Assets

Coin Metrics CoverageCoin Metrics Coverage

SER (Supply Equality Ratio)

Definition

The ratio of supply held by addresses with less than one ten-millionth of the current supply of native units to the supply held by the top one percent of addresses.

Name

MetricID

Unit

Interval

SER (Supply Equality Ratio)

SER

Dimensionless

1 day

Charts

Of the assets shown above, Bitcoin has the highest SER, followed by Ether and Litecoin. The sustained increase in Bitcoin’s SER shows that, in spite of large institutions entering the space, Bitcoin is still very much a grassroots movement.

Interpretation

Supply Equality Ratio (SER). It is analogous to the 20:20 Ratio; a traditional wealth inequality metric that compares the average income of the richest 20% of a society to the poorest 20%. Instead of income, the SER looks at supply held by different accounts within a network. It compares the poorest accounts (the sum held by all accounts with a balance less than 0.00001% of the supply) against the richest accounts (the sum held by all the top 1% addresses).

A high SER signifies high distribution of supply.

While SER provides a novel look into supply distribution that is not possible with most traditional assets, an important caveat is that a single individual can own many cryptoasset addresses. As such, an individual might hold many addresses and supply distribution does not directly map to an individual’s holdings. Also, assets custodied by large financial institutions increases SER’s denominator and puts overall downward pressure on the ratio.

Availability for Assets

Coin Metrics CoverageCoin Metrics Coverage

Value in Top X% of Addrs (native units)

Definition

The sum of all native units held by the top X% addresses by balance at the end of that time interval.

Name

MetricID

Unit

Interval

Value in Top 1% of Addrs (native units)

SplyAdrTop1Pct

Native units

1 day

Value in Top 10% of Addrs (native units)

SplyAdrTop10Pct

Native units

1 day

Release History

Release Version: NDP-EOD 4.8 (Nov, 2020)

Availability for Assets

Coin Metrics CoverageCoin Metrics Coverage

Value in Top 100 Addrs (native units)

Definition

The sum of all native units held by the richest 100 addresses at the end of that time interval.

Name

MetricID

Unit

Interval

Value in Top 100 Addrs (native units)

SplyAdrTop100

Native Units

1 day

Release History

Release Version: NDP-EOD 4.8 (Nov, 2020)

Availability for Assets

Coin Metrics CoverageCoin Metrics Coverage

Current Supply, Execution Layer (native units)

Definition

The sum of all native units ever created and visible on the execution layer ledger (i.e., issued) at the end of that interval. Developed for Ethereum total Supply Calculation.

Name

MetricID

Unit

Interval

Current Supply, Execution Layer (native units)

SplyCurEL

Native Units

1 day

Details

This metric is specific to Ethereum and only available for eth.
This supply value is one part of the input into the SplyCur calculation for Ethereum.

API Endpoints

Current Supply metrics can be accessed using these endpoints:

timeseries/asset-metrics

and by passing in the metric ID's SplyCur in the metrics parameter.

Asset metrics

get

Returns requested metrics for specified assets. Results for block by block metrics (1b frequency) are ordered by tuple (asset, height, block_hash), all other metrics are ordered by tuple (asset, time). You can change the sorting using sort query parameter. Supported output formats are json (default) and csv, use format query parameter to override it. To fetch the next page of results use next_page_url JSON response field or x-next-page-url CSV HTTP header if present. If multiple metrics are requested in the same time the strict policy for partially available metrics among requested ones is applied:

Authorizations

Query parameters

assetsstring[]Required

Comma separated list of assets. Use the /catalog-all/assets endpoint for the full list of supported assets or specify asterisk (*) in order to get metrics for all supported assets.

metricsstring[]Required

Comma separated metrics to request time series data for. Information on all available metrics can be found on page https://coverage.coinmetrics.io/asset-metrics-v2. Use the /catalog-all/metrics or /catalog-all/assets endpoint for the full list of supported metrics per asset.

Example: ["AdrActCnt","BlkHgt"]

frequencystringOptional

Frequency of the metrics. Supported values are 1b (block by block), 1s (one second), 1m (one minute), 5m (five minutes), 10m (ten minutes), 1h (one hour), 1d (one day), 1d-ny-close (one day at New York close time). Please refer to the /catalog/metrics endpoint for the full list. Use the /catalog-all/assets endpoint for the full list of supported frequencies per asset-metric pair.

Default: 1dExample: 1b

statusstring · enumOptional

Which metric values do you want to see. Applicable only for "reviewable" metrics. You can find them in the /catalog/metrics endpoint.

Default: allPossible values:

start_timestringOptional

Start of the time interval. This field refers to the time field in the response. Multiple formats of ISO 8601 are supported: 2006-01-20T00:00:00Z, 2006-01-20T00:00:00.000Z, 2006-01-20T00:00:00.123456Z, 2006-01-20T00:00:00.123456789Z, 2006-01-20, 20060120. Inclusive by default. Mutually exclusive with start_height and start_hash. UTC timezone by default. Z suffix is optional and timezone parameter has a priority over it. If start_time is omitted, response will include time series from the earliest time available.

end_timestringOptional

End of the time interval. This field refers to the time field in the response. Multiple formats of ISO 8601 are supported: 2006-01-20T00:00:00Z, 2006-01-20T00:00:00.000Z, 2006-01-20T00:00:00.123456Z, 2006-01-20T00:00:00.123456789Z, 2006-01-20, 20060120. Inclusive by default. Mutually exclusive with end_height and end_hash. UTC timezone by default. Z suffix is optional and timezone parameter has a priority over it. If end_time is omitted, response will include time series up to the latest time available.

start_heightinteger · int64Optional

The start height indicates the beginning block height for the set of data that are returned. Inclusive by default. Mutually exclusive with start_time and start_hash.

end_heightinteger · int64Optional

The end height indicates the ending block height for the set of data that are returned. Inclusive by default. Mutually exclusive with end_time and end_hash. This parameter is disabled for Community users.

start_hashstringOptional

The start hash indicates the beginning block height for the set of data that are returned. Inclusive by default. Mutually exclusive with start_time and start_height.

end_hashstringOptional

The end hash indicates the ending block height for the set of data that are returned. Inclusive by default. Mutually exclusive with end_time and end_height.

start_inclusivebooleanOptional

Inclusive or exclusive corresponding start_* parameters.

Default: true

end_inclusivebooleanOptional

Inclusive or exclusive corresponding end_* parameters.

Default: true

min_confirmationsinteger · int32 · max: 99Optional

Specifies how many blocks behind the chain tip block by block metrics (1b frequency) are based on. Default for btc is 2 and 99 for eth. For example, a min_confirmations of 0 means metrics are being calculated for the block at the tip of the chain (the latest block received by our node) whereas a min_confirmations of 6 means that metrics are being applied to the block that is 6 blocks behind the chain tip (i.e., the 7th block if the chain tip is block 1).

timezonestringOptional

Timezone name for start_time and end_time timestamps. This parameter does not modify the output times, which are always UTC. Format is defined by TZ database.

Default: UTCExample: America/New_York

page_sizeinteger · int32 · min: 1 · max: 10000Optional

Number of items per single page of results. The value of this parameter is ignored if the endpoint supports the format parameter and its value is set to json_stream.

Default: 100

paging_fromstring · enumOptional

Where does the first page start, at the start of the interval or at the end. The value of this parameter is ignored if the endpoint supports the format parameter and its value is set to json_stream.

Default: endPossible values:

sortstring · enumOptional

How results will be sorted. Metrics with 1b frequency are sorted by (asset, height, block_hash) tuples by default. Metrics with other frequencies are sorted by (asset, time) by default. If you want to sort 1d metrics by (time, asset) you should choose time as value for the sort parameter. Sorting by time is useful if you request metrics for a set of assets.

Default: assetPossible values:

limit_per_assetinteger · int32Optional

How many entries per asset result should contain. For example, this combination of parameters assets=btc,eth&metrics=ReferenceRate&limit_per_asset=1 returns the latest ReferenceRate values for btc and eth.

prettybooleanOptional

Human-readable formatting of JSON responses.

Default: false

formatstring · enumOptional

Format of the response.

Default: jsonPossible values:

null_as_zerobooleanOptional

Nulls are represented as zeros in the response.

Default: false

next_page_tokenstringOptional

Token for receiving the results from the next page of a query. Should not be used directly. To iterate through pages just use next_page_url response field.

ignore_forbidden_errorsbooleanOptional

Ignore "forbidden" errors for the items you currently don't have access to.

Default: false

ignore_unsupported_errorsbooleanOptional

Ignore "unsupported" errors for not currently supported by Coin Metrics items.

Default: false

Responses

200

Time series of metrics for an asset.

400

Asset not found.

application/json

401

Requested resource requires authorization.

application/json

403

Requested resource is not available with supplied credentials.

application/json

414

Provided URI is too long. It must not be greater than 10000 symbols.

get

GET /v4/timeseries/asset-metrics HTTP/1.1
Host: api.coinmetrics.io
Accept: */*

{
  "data": [
    {
      "asset": "btc",
      "time": "2020-02-29T00:00:00.000000000Z",
      "PriceUSD": "8582.09029964933",
      "SplyBMXNtv": "283220.10827406",
      "SplyBMXNtv-status": "reviewed",
      "SplyBMXNtv-status-time": "2020-03-01T09:59:13.847251000Z"
    },
    {
      "asset": "btc",
      "time": "2020-03-01T00:00:00.000000000Z",
      "PriceUSD": "8541.77389392169",
      "SplyBMXNtv": "284691.32323907",
      "SplyBMXNtv-status": "reviewed",
      "SplyBMXNtv-status-time": "2020-03-02T14:00:02.622168000Z"
    }
  ],
  "next_page_token": "0.MjAyMC0wNi0wN1QwMDowMDowMFo,MjAyMC0wNi0wN1QwMDowMDowMFo",
  "next_page_url": "https://api.coinmetrics.io/v4/timeseries/asset-metrics?api_key=<your_key>&pretty=true&assets=btc&metrics=SplyBMXNtv,PriceUSD&page_size=2&next_page_token=0.MjAyMC0wNi0wN1QwMDowMDowMFo,MjAyMC0wNi0wN1QwMDowMDowMFo"
}

curl --compressed "https://api.coinmetrics.io/v4/timeseries/asset-metrics?metrics=SplyCur&assets=eth&pretty=true&api_key=<your_key>"

import requests
response = requests.get('https://api.coinmetrics.io/v4/timeseries/asset-metrics?metrics=SplyCur&assets=eth&pretty=true&api_key=<your_key>').json()
print(response)

from coinmetrics.api_client import CoinMetricsClient

api_key = "<API_KEY>"
client = CoinMetricsClient(api_key)

print(
    client.get_asset_metrics(
        metrics="SplyCur", 
        assets="eth",
    ).to_dataframe()
)

PreviousBurnt Supply NextFree Float Supply

Last updated 1 year ago

Was this helpful?

Current Supply

Contents

Current Supply (native units)

Definition

Details

Chart

Asset-Specific Details

Release History

See Also

Availability for Assets

NDF (Network Distribution Factor)

Definition

Release History

Interpretation

Availability for Assets

SER (Supply Equality Ratio)

Definition

Charts

Interpretation

Availability for Assets

Value in Top X% of Addrs (native units)

Definition

Release History

Availability for Assets

Value in Top 100 Addrs (native units)

Definition

Release History

Availability for Assets

Current Supply, Execution Layer (native units)

Definition

Details

API Endpoints

Asset metrics